Seafile
This is a backend for the Seafile storage service:
- It works with both the free community edition or the professional edition.
- Seafile versions 6.x, 7.x, 8.x and 9.x are all supported.
- Encrypted libraries are also supported.
- It supports 2FA enabled users
- Using a Library API Token is not supported
Configuration
There are two distinct modes you can setup your remote:
- you point your remote to the root of the server, meaning you don't specify a library during the configuration:
Paths are specified as
remote:library. You may put subdirectories in too, e.g.remote:library/path/to/dir. - you point your remote to a specific library during the configuration:
Paths are specified as
remote:path/to/dir. This is the recommended mode when using encrypted libraries. (This mode is possibly slightly faster than the root mode)
Configuration in root mode
Here is an example of making a seafile configuration for a user with no two-factor authentication. First run
rclone config
This will guide you through an interactive setup process. To authenticate you will need the URL of your server, your email (or username) and your password.
No remotes found, make a new one?
n) New remote
s) Set configuration password
q) Quit config
n/s/q> n
name> seafile
Type of storage to configure.
Enter a string value. Press Enter for the default ("").
Choose a number from below, or type in your own value
[snip]
XX / Seafile
\ "seafile"
[snip]
Storage> seafile
** See help for seafile backend at: https://rclone.org/seafile/ **
URL of seafile host to connect to
Enter a string value. Press Enter for the default ("").
Choose a number from below, or type in your own value
1 / Connect to cloud.seafile.com
\ "https://cloud.seafile.com/"
url> http://my.seafile.server/
User name (usually email address)
Enter a string value. Press Enter for the default ("").
user> me@example.com
Password
y) Yes type in my own password
g) Generate random password
n) No leave this optional password blank (default)
y/g> y
Enter the password:
password:
Confirm the password:
password:
Two-factor authentication ('true' if the account has 2FA enabled)
Enter a boolean value (true or false). Press Enter for the default ("false").
2fa> false
Name of the library. Leave blank to access all non-encrypted libraries.
Enter a string value. Press Enter for the default ("").
library>
Library password (for encrypted libraries only). Leave blank if you pass it through the command line.
y) Yes type in my own password
g) Generate random password
n) No leave this optional password blank (default)
y/g/n> n
Edit advanced config? (y/n)
y) Yes
n) No (default)
y/n> n
Remote config
Two-factor authentication is not enabled on this account.
--------------------
[seafile]
type = seafile
url = http://my.seafile.server/
user = me@example.com
pass = *** ENCRYPTED ***
2fa = false
--------------------
y) Yes this is OK (default)
e) Edit this remote
d) Delete this remote
y/e/d> y
This remote is called seafile. It's pointing to the root of your seafile server and can now be used like this:
See all libraries
rclone lsd seafile:
Create a new library
rclone mkdir seafile:library
List the contents of a library
rclone ls seafile:library
Sync /home/local/directory to the remote library, deleting any
excess files in the library.
rclone sync --interactive /home/local/directory seafile:library
Configuration in library mode
Here's an example of a configuration in library mode with a user that has the two-factor authentication enabled. Your 2FA code will be asked at the end of the configuration, and will attempt to authenticate you:
No remotes found, make a new one?
n) New remote
s) Set configuration password
q) Quit config
n/s/q> n
name> seafile
Type of storage to configure.
Enter a string value. Press Enter for the default ("").
Choose a number from below, or type in your own value
[snip]
XX / Seafile
\ "seafile"
[snip]
Storage> seafile
** See help for seafile backend at: https://rclone.org/seafile/ **
URL of seafile host to connect to
Enter a string value. Press Enter for the default ("").
Choose a number from below, or type in your own value
1 / Connect to cloud.seafile.com
\ "https://cloud.seafile.com/"
url> http://my.seafile.server/
User name (usually email address)
Enter a string value. Press Enter for the default ("").
user> me@example.com
Password
y) Yes type in my own password
g) Generate random password
n) No leave this optional password blank (default)
y/g> y
Enter the password:
password:
Confirm the password:
password:
Two-factor authentication ('true' if the account has 2FA enabled)
Enter a boolean value (true or false). Press Enter for the default ("false").
2fa> true
Name of the library. Leave blank to access all non-encrypted libraries.
Enter a string value. Press Enter for the default ("").
library> My Library
Library password (for encrypted libraries only). Leave blank if you pass it through the command line.
y) Yes type in my own password
g) Generate random password
n) No leave this optional password blank (default)
y/g/n> n
Edit advanced config? (y/n)
y) Yes
n) No (default)
y/n> n
Remote config
Two-factor authentication: please enter your 2FA code
2fa code> 123456
Authenticating...
Success!
--------------------
[seafile]
type = seafile
url = http://my.seafile.server/
user = me@example.com
pass =
2fa = true
library = My Library
--------------------
y) Yes this is OK (default)
e) Edit this remote
d) Delete this remote
y/e/d> y
You'll notice your password is blank in the configuration. It's because we only need the password to authenticate you once.
You specified My Library during the configuration. The root of the remote is pointing at the
root of the library My Library:
See all files in the library:
rclone lsd seafile:
Create a new directory inside the library
rclone mkdir seafile:directory
List the contents of a directory
rclone ls seafile:directory
Sync /home/local/directory to the remote library, deleting any
excess files in the library.
rclone sync --interactive /home/local/directory seafile:
--fast-list
Seafile version 7+ supports --fast-list which allows you to use fewer
transactions in exchange for more memory. See the rclone
docs for more details.
Please note this is not supported on seafile server version 6.x
Restricted filename characters
In addition to the default restricted characters set the following characters are also replaced:
| Character | Value | Replacement |
|---|---|---|
| / | 0x2F | ／ |
| " | 0x22 | ＂ |
| \ | 0x5C | ＼ |
Invalid UTF-8 bytes will also be replaced, as they can't be used in JSON strings.
Seafile and rclone link
Rclone supports generating share links for non-encrypted libraries only. They can either be for a file or a directory:
rclone link seafile:seafile-tutorial.doc
http://my.seafile.server/f/fdcd8a2f93f84b8b90f4/
or if run on a directory you will get:
rclone link seafile:dir
http://my.seafile.server/d/9ea2455f6f55478bbb0d/
Please note a share link is unique for each file or directory. If you run a link command on a file/dir that has already been shared, you will get the exact same link.
Compatibility
It has been actively developed using the seafile docker image of these versions:
- 6.3.4 community edition
- 7.0.5 community edition
- 7.1.3 community edition
- 9.0.10 community edition
Versions below 6.0 are not supported. Versions between 6.0 and 6.3 haven't been tested and might not work properly.
Each new version of rclone is automatically tested against the latest docker image of the seafile community server.
Standard options
Here are the Standard options specific to seafile (seafile).
--seafile-url
URL of seafile host to connect to.
Properties:
- Config: url
- Env Var: RCLONE_SEAFILE_URL
- Type: string
- Required: true
- Examples:
- "https://cloud.seafile.com/"
- Connect to cloud.seafile.com.
- "https://cloud.seafile.com/"
--seafile-user
User name (usually email address).
Properties:
- Config: user
- Env Var: RCLONE_SEAFILE_USER
- Type: string
- Required: true
--seafile-pass
Password.
NB Input to this must be obscured - see rclone obscure.
Properties:
- Config: pass
- Env Var: RCLONE_SEAFILE_PASS
- Type: string
- Required: false
--seafile-2fa
Two-factor authentication ('true' if the account has 2FA enabled).
Properties:
- Config: 2fa
- Env Var: RCLONE_SEAFILE_2FA
- Type: bool
- Default: false
--seafile-library
Name of the library.
Leave blank to access all non-encrypted libraries.
Properties:
- Config: library
- Env Var: RCLONE_SEAFILE_LIBRARY
- Type: string
- Required: false
--seafile-library-key
Library password (for encrypted libraries only).
Leave blank if you pass it through the command line.
NB Input to this must be obscured - see rclone obscure.
Properties:
- Config: library_key
- Env Var: RCLONE_SEAFILE_LIBRARY_KEY
- Type: string
- Required: false
--seafile-auth-token
Authentication token.
Properties:
- Config: auth_token
- Env Var: RCLONE_SEAFILE_AUTH_TOKEN
- Type: string
- Required: false
Advanced options
Here are the Advanced options specific to seafile (seafile).
--seafile-create-library
Should rclone create a library if it doesn't exist.
Properties:
- Config: create_library
- Env Var: RCLONE_SEAFILE_CREATE_LIBRARY
- Type: bool
- Default: false
--seafile-encoding
The encoding for the backend.
See the encoding section in the overview for more info.
Properties:
- Config: encoding
- Env Var: RCLONE_SEAFILE_ENCODING
- Type: Encoding
- Default: Slash,DoubleQuote,BackSlash,Ctl,InvalidUtf8
--seafile-description
Description of the remote.
Properties:
- Config: description
- Env Var: RCLONE_SEAFILE_DESCRIPTION
- Type: string
- Required: false
